process 01
Where Ideas Take Shape
Each design starts as a model, carved in wax, sculpted from hot metal, or built in 3D. That original is polished and made ready for moulding.
1 / 5
Where Every Piece Begins
How I bring each piece to life
process 02
Preserving the Originals
A good design often arrives by chance, so I make a rubber mould of each original. That way the moment can be made again.
2 / 5
process 03
The Wax Blueprint
Every piece begins as a wax pulled from its mould. I check each one for bubbles and seams, and make sizing or design tweaks here.
3 / 5
process 04
From Wax to Metal
The waxes go to a local casting house. Set in plaster, the wax is burned out and molten metal poured in its place. The piece takes form as it cools.
4 / 5
process 05
Finishing Touches
Back at the bench I cut, grind, sand and polish each casting. Posts are soldered, chains assembled link by link, every detail finished by hand.
5 / 5